The Moonen 112 is a twin-screw, three-deck displacement motor yacht with a large launch area and wheelhouse at the bridge deck. The owners cabin is situated at main deck, together with the saloon, dining, galley and crew mess. Three spacious guest cabins and the crew area for five crew in three cabins are situated at lower deck. In the aft ship a tender bay is constructed with a launching sledge for the tender. The round bilge of this displacement hull makes the yacht seaworthy and gives her a very economical fuel consumption and long range at lower speeds. Together with the low noise and vibration levels this well-equipped yacht gives great comfort and luxury. Moonen Shipyards will build and fit out the yacht in accordance with their usual high quality standards and deliver it to the principal, after extensive sea trials, in a ready-to-operate condition.

range moonen4
设计 René van der Velden Yacht Design
海军建筑师 To be selected by yard
室内设计 To be selected in consultation with the owner
分类 Lloyd’s RS, ✠100A1, SSC, Yacht Mono, G6, [✠] LMC (optional)
注册 MCA LY3 (optional)


  • Dimensions
  • Construction
  • Tank capacities
  • Propulsion, manoeuvring & stabilisation
  • Systems
  • Electrical installation
  • Household equipment, provisional sum, to be selected
  • Exterior equipment
  • Interior
Specification Value
Length overall 34,15 metres
Length waterline 31,25 metres
Beam max.

8,00 metres

Draught max. 2,25 metres
Displacement full load 250 metric tons
Gross Tonnage

313 GT

Maximum speed 14 knots at 10% load condition
Cruising speed

12,5 knots at 50% load condition and 85% RPM


4.500 nautical miles at 10 knots

Specification Value

Steel grade A, with round bilge, double bottom integrated tanks, box keel, 
stainless-steel portholes with hardened glass, stainless steel anchor pocket, 
watertight hinged bulkhead doors, watertight transom hatch.


Aluminium, welded window frames with double (tinted) glazing, aluminium
hinged doors, high-polish stainless steel electrical sliding door at main deck aft


Thermal and acoustic insulation based on glasswool as advised by a noise and
vibration consultant.

Specification Value

43.000 litres

Fresh water

9.500 litres

Waste water

2.000 litres

Solid waste

(optional 1000 litres)

Used lub oil  500 litres
Clean lub oil (optional 300 litres)
Specification Value
Diesel engines Caterpillar C18 Acert with wet exhaust
Power ratings

B, 2x 500kW at 1800 rpm

Transmissions To be selected by yard
Propellor shafts Rubber Design oil bath lubricated

5-blade, diameter approx. 1100mm

Engine controls Bosch Rexroth Marex OS-II

Naca shaped steel rudders, Rubber Design grease lubricated shaft with double 
hydraulic ram system

Bowthruster Hydraulic 65kW twin propeller

Naiad hydraulic active fin stabilizers while cruising (optional stabilisation at 

Specification Value

Integrated double bottom tanks and a day tank in engine room, Kübler 
Level sensors, Racor double filters, electrical fuel trimming pump and manual 
back up pump (optional Alfa laval fuel separator)

Clean lub oil Oil supply system with electrical pump (optional clean oil tank)
Used lub oil Used lub oil tank with electrical pump and shore connection point
Cooling water

Two stainless-steel water inlets with filters and butterfly valves connected to a 

Bilge water

One general service pump and suction points through the boat, connected
at a manifold (optional bilge water separator with bilge water tank)

Fire extinguishing

The general service pump for the bilge system is used as fire pump with
several hose connections through the yacht, Novec hand remote fire
extinguishing system in engine room

Fresh water

Integrated double bottom tank, Speck water-pressure pump, Idromar carbon
filter, hot water boiler with external water heater (optional Idromar water

Waste water

Integrated double bottom tank and polypropylene holding tank with electrical
overboard pump or to shore connection (optional Hamann sewage treatment
system with solid waste tank)


Central hydraulic system with pumps at main engines and electrical harbour
pump. Supplying stabilizers, bow thruster, windlasses, capstans, deck crane
Passerelle and hydraulic steering machine both with separate hydraulic
power pack and wired controls


Air-conditioning, Mediterranean conditions, with chiller in engine room
and fancoils in accommodations, heating with chill chasers at each fan coil and
electrical floor heating in bathrooms, fresh air system in lower-deck
cabins, crew area and owners cabin at main deck, frequency controlled engine
room ventilation, with fire shutters and mist eliminator in inlet

Specification Value
Main system

 230 / 400 volt 3-phase
24V emergency

Power supply

Two 50kW synchronized generators
Shore power 400V / 100 A with shore transformer
(optional frequency converter)

Monitoring and control

PLC controlled with 2 touch screens

Interior lighting 230V, 12V halogen and 24V emergency lighting, partly with dimmers
Navigation lighting 

24V Aqua Signal

Deck lighting Savage Marine
Searchlight Remote controlled Sanshin in mast
Alarm systems Integrated fire-alarm system


Specification Value
Galley equipment Miele
Laundry Professional Miele washing machine and dryer
Pantry bridge deck aft Refrigerator and icemaker
Specification Value
Bollards and fairleads Stainless steel tubular double bollards and fairleads
Anchor and chain

Two Balanced 150 kg Pool-N anchors, two 120m galvanised chains 16 mm

Windlasses Two Muir hydraulic windlasses type VRC 6000
Capstans Two Muir hydraulic capstans type VC 3500
Deck crane One hydraulic crane 1500kg at 5m (optional MCA requirement)
Tenders (owner’s delivery)

Castoldi 17 jet tender at sliding cradle in stern garage
Rescue tender (optional MCA requirement) at bridge deck aft


Hydraulic box type, 2 metres reach behind the stern

Life rafts

Four RFD Life rafts

Swimming ladder Stainless-steel, removable
Accommodation ladder Marquipt manual
Railing High-polish stainless steel round 38mm at 32mm stanchions

15mm teak decking on 4mm multiplex at main deck, bridge deck, swimming
platform, outside stairs and benches

Covers Provisional sum, to be selected
Specification Value
Floors Plywood insulated panels covered with carpet
Walls & doors Plywood panels with silk veneer finish
Ceilings Fabric lined panels (except bath rooms and galley)
Cabinets & bedframes

Plywood panels with massive details with a silk finish


White HPL plywood panels with massive details,
durable floor cloth and fabric lined ceilings

Upholstery Provisional sum, to be selected
Marble, granite, tiles Provisional sum, to be selected
Door hardware Provisional sum, to be selected
Door hardware Provisional sum, to be selected